The Microcare Charge Controller with the Maximum Power Point Tracker Regulator is designed to interface between the solar panel and the batteries. The tracker will always find the optimum power point of the solar panel system to ensure that maximum power is extracted from the solar panel and put into the batteries.
Using this system up to 30% more power can be extracted from the solar panel than using shunt or series PWM regulators. The MPPT charge controller will deliver the highest charge current possible for a given set of operating conditions. The ability to step down a high voltage solar array to a low voltage battery can save you money by reducing the size of the wire required and making the installation simpler and faster.
Multi-Voltage (Automatic/Manual selection of voltage – 12/24/36/48V)
PV Input Voltage
Open Circuit Absolute Maximum 150VDC
5-stage 3-level (Equalize/Boost/Float)
Charges to 15V per battery (Timed or Full)
Default charges to 14.5V (Set capable)
Default 13.8V per battery (Set capable)
DC/DC Switch Mode
Voltage Step Down
Can charge a lower voltage battery from a higher voltage PV array
Less than 1W
0 – 40ºC
20, 40, 63, and 100A DP Input Circuit Breaker
25, 50, 63, and 100A DP Output Circuit Breaker
20/40A 210mm (L) x 220mm (W) x 110mm (H)
60A 300mm (L) x 220mm (W) x 120mm (H)
100A 350mm (L) x 220mm (W) x 130mm (H)
20/40A 3kgs / 60A 4kg / 100A 5kg
Automatic selection of Battery voltage (12 – 48V)
Input panel voltage (20-150Voc)
Circuit Breaker protection – Full input and output protection
Electronic current limiting.
4 Line LCD Display: Battery Voltage, Charge Mode (Equalize, Boost and Float) showing Charge Current, Panel Voltage and Output Power from the Panels
Data Logger: 24hr Average and 63-day logger
Battery/ Temperature Sensors, Daylight Switch, Relay Interface. Radio Link.