MPPT Charge Controllers charge regulator or battery regulator limits the rate at which electric current is added to or drawn from electric batteries. It prevents overcharging and may protect against over-voltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining (“deep discharging”) a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. The terms “charge controller” or “charge regulator” may refer to either a stand-alone device, or to control circuitry integrated within a battery pack, battery-powered device, or battery charger.
Are sold to consumers as separate devices, often in conjunction with solar or wind power generators, for uses such as RV, boat, and off-the-grid home battery storage systems. In solar applications, charge controllers may also be called solar regulators. Some charge controllers have additional features. Features such as a low voltage disconnect (LVD), a separate circuit which powers down the load when the batteries become overly discharged. Some battery chemistries are such that over-discharge can ruin the battery.
A series solar charge controller disables further current flow into batteries when they are full. A shunt charge controller diverts excess electricity to an auxiliary or load, such as an electric water heater, when batteries are full.
Simple charge controllers stop charging a battery when they exceed a set high voltage level and re-enable charging. When the battery voltage drops back below that level. Pulse width modulation (PWM) and maximum power point tracker (MPPT) technologies are more electronically sophisticated, adjusting charging rates depending on the battery’s level, to allow charging closer to its maximum capacity.
MPPT Charge Controllers’ capability frees the system designer from closely matching available PV voltage to battery voltage. Considerable efficiency gains can be achieved, particularly when the PV array is located at some distance from the battery. By way of example, a 150 volt PV array connected to an MPPT charge controller can be used to charge a 24 or 48 volt battery. Higher array voltage means lower array current, so the savings in wiring costs can more than pay for the controller.
Charge controllers may also monitor battery temperature to prevent overheating. Some charge controller systems also display data, transmit data to remote displays, and data logging to track electric flow over time.
Our Product Range
PRICES ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE | SHIPPING NOT INCLUDED
Please note that selected items may not be in stock but you are welcome to still place an order. BHG Power will confirm lead time upon receipt of your order. Dismiss